Contrary to the others here,while I love Paperless,using it for textbooks and notes only worked "somewhat" for me - it becomes quite clunky after a while.
Personally I would rather go with Calibre if I were you if you have more textbooks than notes. Even for notes, they can be attached as well and better organised than Paperless.
(And don't get me wrong paperless is awesome and I use it heavily)
There are two sides of issues with FreeCAD: On one side it has usability issues. The comes largely from the "workbench" concept, so often you will be missing a tool unless you change workbenches which in terms leads to another tool missing. Furthermore the UI is not really consistent in how things are named, how things are done,etc. Same goes for the actual step of editing things. So while you eventually "get there", especially as a newcomer, it will take time and a bit of try and error. Parametric solutions are also very clunky and often not as feature rich. (Which is a pain if using it for woodworking) Another thing that is the whole "derivate" thing most professional CAD solutions offer - e.g. build plans, CAM, BOM, simulation,etc. You can do them with FreeCAD, but it takes some plugins and is nearly as good or comfortable as the professional solutions.
The other side is performance and stability. FreeCAD is a nightmare when it comes to importing thing with a lot facets or large files, is unstable as fuck when working with large assemblies and generally is slower compared to other solutions. (Even the otherwise not very fast Solidworks is faster)
In the end I would recommend you to try all three of them (and a few others from the list) and then decide if you can be bothered to use FreeCAD or find another solution worth it more. (Personally I would avoid Fusion,btw. due to the fact that it gets more enshitified daily)
There are two more alternatives, sadly for Windows only.
BUT: Both are Windows only(more or less), and of course commercial.
Sadly FreeCAD is not even close to most professional products - while it can be used for a lot of things,these things will take longer, be often more unstable and less "straightforward".Nevertheless for most non-professional uses,it will suffice.
Yeah, it's a real pain, sadly. Tbh, I don't think we will ever find a major CAD company support Linux again - even Siemens, who supported NX on Linux for ages have stopped.
From my POV we have two choices: Either we make FreeCAD a viable alternative that beats the competition or at least is on the same page as them - which I find highly unlikely with the current system, so a fork+someone who finances it would be needed- or we find ways to optimise/enable Windows based CAD on Linux*. The former worked for the other tool we regularly use: QGIS. That has become the de facto standard in a lot of fields and has sometimes even pushed out commercial competition.
The later is imho the better way for CAD as it is really really hard for companies to change their CAD (even within windows and with a commercial product) - I have a business estimate for an medical product company who estimated 30k € per employee under ideal conditions, possibly more if something goes wrong(Training, loss of production, licencing, converting of files, integration of external databases,etc.). We have done it for games (tbf,with a lot of help from valve) and surely can do it with CAD (which in theory should be easier).
The last option is a bad one: In theory we could use FreeCAD as a backengine and develop themes that replicate the workflow of other products. But for that FreeCAD would need to improve on so many points beforehand...
Photoshop is a professional level software that is used by hobbyists as well - we compare affinity to this level as well and that's okay.
So we should compare FreeCAD on this level as well. And from that perspective it's sadly exactly what I called it.
The roughness from a commercial perspective is an issue as it costs money - because it takes people much more time to do things,even when they work.
And there are still way too many issues with it that sometimes are a result of infighting within the development community and exist for5+ years. To name a few:
Just to name a few... It's simply not on the level even Solidworks has in that regards (which has it's own issues,yes, I am on the same page with you there). While I don't really like Siemens NC (or Solidedge for that matter) it's indeed a reasonably good software - but me disliking them might be the result of them dropping Linux support more or less unannounced. AutoCAD and it's sister products are imho worse than Creo,but again: More of a personal thing. In the end they sadly (!) beat FreeCAD in all aspects. By far. Which is pretty much a catastrophe as FreeCAD is the only Linux alternative atm.
But we are talking about a commercial level here - Adobe Photoshop is primarily a professional software that is also used by prosumers/hobbyists,not vice versa. We all judge e.g. Affinity on that level (rightfully).
And seen from that level FreeCAD is,well, what I said. Sure,it might do for some hobbyists and even some small companies, but even then it shows it's massive structural flaws. Which partly, and this is why I am so openly critical of it, exist for 5+ years and are there due to the ongoing infighting in the development community.
The problem with is roughness is also a problem in terms of commercial use. When I do things as a hobbyist it's just my time that is consumed. Not ideal,but it is what it is. In a commercial setting my staff takes more time due to this roughness and that costs money - much more money than commercial solutions cost. Which is bad - especially as it forces people to stick with Windows as there are no properly working alternatives on Linux.
And yes, onshape and fusion are horrible to hobbyists in that regard, but Solidedge(free) and to some extend Solidworks(cheap) are decent.
Sadly FreeCAD is absolutely shit compared to what commercial CAD products offer - and sadly even 1.0 didn't change their problems.
Huh? "Very south west"/"very north east" is not quite right. Füssen is very much in the middle of the south of Germany.
Black Forest is around 2,5-3h(max.)/5.5h by train from the Black Forest by car (trust me,I live there and have to travel to Füssen from time to time).
Berlin is another story, takes around 7.5h by car (and can be even faster by train, 6.5h is possible) from Füssen.
But it's nowhere near impossible, or far. Especially as there are more than enough interesting destinations for a tourist in between: Munich, Nürnberg, maybe with a detour to Rothenburg.
I can understand your reservations against Neuschwanstein, I absolutely understand every tourist that wants to see it. It's quite nice from afar and well, while it's often fairly overcrowded it can be avoided if one chooses the right season and time. And it's always quite a bummer for most people to not have seen it in a once in a lifetime trip.
And I have no idea how you come to the conclusion that the Middle Rhine valley (which is rather annoyingly to travel to) is closer - and while the German view on the Middle Rhine valley is quite romantic, it has lost its appeal for most oversea tourist nowadays. After having many clients who were,honestly, quite underwhelmed, I no longer recommend it for people with a short time to spend.
Anyway, OP, shoot me a message if you make it to the forest, always up for a beer.
Basically all European countries, all but five (South)- East Asian ones, the majority of African one as well as Australia and a few more.
The downside: A fair share them for less than 24h, often only for 45min. Oh the joys of working in retrieval medicine.
For example I have been to Greece multiple times...but I have never even seen even the Akropolis from the ground.
It's actually not that easy. Parts of countries can be actually be part or not part of international agreements - Greenland for example is not part of the EU, Denmark as such is. Same goes for a lot,but not all, French oversea territories.
In terms of Greenland this is actually bad for Greenland in hindsight as the EU defence accords are more far reaching as the NATO accords which take precedence, though.
If a Member State is the victim of armed aggression on its territory, the other Member States shall have towards it an obligation of aid and assistance by all the means in their power, in accordance with Article 51 of the United Nations Charter. This shall not prejudice the specific character of the security and defence policy of certain Member States.
And this is why KNX and Home Assistant are a good idea.
That's a bit below the level of reliability I need,sadly - before doing that I could also go for a non ECC solution.
Mailbox.org They could go all the way and become "cool and cloud" but decided not to.
Haix While their customer service is not what it used to be they are still more than decent to a point it hurts their sales.
With my last one I am not 100% convinced: Mikrotik. While their stuff I great and cheap for what it does, I also had one really lacking support experience with them (they forgot to pack the rack ears for a switch and neither the vendor nor they could somehow get me ones. Another premium partner of them helped me for free and since then will always get my business). But in total they are still the good guys I think.
Debatting with myself and to a lesser degree what to do in terms of our homeserver situation. While the proxmox node has more than enough CPU and RAM capacity left, the NAS, an older Synology, is full to the brim, EOL and needs replacement.And sadly being a mini PC the proxmox node is unable to get the HDs connected.
So something new is needed and I would rather have my setup streamlined and combine the two.
But that is... More difficult than anticipated. I really would like something power saving with ECC ram that can take at least two PCI-e (SFP+ and a potential graphic card for AI later on). That can take 4,better 6 HDs. And at least one,better two NVMe. ...that basically means self building which I am happy with, but all current builds I calculate come out somewhere south of 2000€ (including two new HDs, as two old ones need to go). And that's sadly out of the financial possibility at the moment.
If only the fucking Ugreen (DXP6800)would support ECC. While not ideal in terms of PCI-e it would be enough to do the trick.
Don't go to Proton or Tuta - both are impossible to get out of basically, do not support free standards and Proton is scumy in terms of their marketing.
Mailbox.org Infomaniak Fastmail Posted
Just to name a few.
Yeah, that would be favourable.
But: Blackberry has acquired multiple companies that deliver government grade android devices that are fully degooglefied and heavily secured. They are the de facto market leader.
Even if they bring out a properly secured and degooglefied Android that would be a huge step in the right direction.
Yeah, Blender is one of the few points where it works. QGIS is the other.
Yeah. Gaming isn't the issue for a long time. Productivity is. Rantmode
Proper CAD for Linux? Nonexistent, even worse, some manufacturers intentionally make sure you can't use a VM either until you massively pay extra.(Looking at you Dassault) FreeCAD is a shitshow (and that is entirely the communities fault) and no professional competitor has shown any incentive - even though there is a increasing market for Linux in some professional capacities. And the current projects to get bottles/wine/etc. to work are maintained by a single guy (bless him) who tried to do it for multiple systems at once and seems to have given up mostly.
Graphic design? While the situation is a little bit better,it's still a shitshow. No, GIMP and Inkscape are not sufficient replacements for Adobe or even Affinity. They are "good enough" for most things,but they are not nearly ready for production use in any professional capacity.
Office? Yeah. Sadly equally bad. I really really really hate Microsoft and Office. But: They are inherently good at what they do. Not because people get used to it - but because they work. I used LibreOffice since back when it was still StarOffice. (And have used Lotus before that) But we as the open source community still rather fight about ribbons (even though they became the standard everywhere) than get LibreCalc halfway production ready or make proper collaborative working possible. Or get a proper fucking search into thunderbird.
And this is the problem: OSS is so damn up its own ass, that it does not see the bigger picture. We can fight about the kernel allowing Rust, having Ribbons, which is the proper workbench in FreeCAD or about packet managers, distro flavours,etc. In the end what will happen is that the other side will be alienated, excuse themselves from further contributions and, and this is even worse, a lot of possible future contributors will also not contribute. And wow, someone was right and can think he (and it's almost always a he) thinks he knows the only truth.
While the actual truth is held by the others. The ones that don't even are bothered by the whole fucking discussing because they make the money, they influence millions and they are the ones setting de facto standards. And yes, that will mean we will need to adapt.
Including adapting market standards. When 95% of the world does a thing "that way", it's simply preposterous to claim "your way" is the right way, even it's for historical reasons. (Easy example: CTRL C / CTRL V)
Same goes for adapting software. If 10% of the development power of Libre Office,GIMP, etc. would have been used to further Wine/Proton to get people to be able to use their industrial standard software we would have seen much much much larger adoption rates,both professionally and for private users.
Because that is literally what happened in gaming. Once Valve basically put massive efforts into allowing Windows games to be played on Linux - and not into developing native Linux games all of a sudden Linux gaming went ahead. Because it is a advantage for your game to work natively and well on a steam deck.
This is even more relevant for production software. If a CEO/CIO has reached a point where his main production software runs on Linux and he has deployed Linux in his company his next software contract for other software will go towards the company who runs better in their environment.
Rant out
(Nothing personal,mate, I just spent the last two days to get fucking CAD to work on Fedora...)
Permanently Deleted
Or if the US fucks up enough for the rest of the world to put a UNO reverse card on the US. If China and the EU do that, the US is fucked within a few months. A "you can't trade with either of these markets when you trade with the US" would be interesting.
And tbh, from what I gather it's absolutely a option that is being discussed in diplomatic circles. The main reason it's not on the table is the huge amount of debts the USA has in China. And the EU will use it as a backup arrow for "further escalation". Maybe someone should tell Trump who actually delivers the machines for the factories he wants to "bring back". Hint: It's not the US.
20°C min, 24.5°C max.
That's 68°F and 76°F in OrangeUnits.
But tbh,I don't have an AC at the moment,so the max. value is only achieved by automatic ventilation. But I has it on the same range when I was living in a country with AC.