Yes normally the tube gets inserted into another tube, which is the stuck into another tube or a foot. This leaves a large moment force directly where the tube is pushed into the other tube. Most likely even with careful use, this tube will break very quickly. The layer joint is the weak spot and the type of plastic most likely isn't ideal.
Vacuum cleaner parts are made from a high impact plastic, something that's tough but a bit on the softer side. This way it can take a beating without breaking into a million pieces.
3D printing this is cool and impressive to pull off such a high and narrow print. But practically speaking it makes no sense.
You'd be surprised how much a concrete pillar holding up an overpass can actually take. They don't break like in the movies, they are specifically designed to take big truck impacts and not fail. Anybody crashing a Cybertruck at highway speeds into one of those is instantly turned into red colored mashed potatoes.
I've been using git for 10+ years and still sometimes do this. I know I could fix it, I also pretty much know what to do to fix it. However nuking the thing from orbit and restarting takes like 30 secs, so it's never worth fixing.
Yes normally the tube gets inserted into another tube, which is the stuck into another tube or a foot. This leaves a large moment force directly where the tube is pushed into the other tube. Most likely even with careful use, this tube will break very quickly. The layer joint is the weak spot and the type of plastic most likely isn't ideal.
Vacuum cleaner parts are made from a high impact plastic, something that's tough but a bit on the softer side. This way it can take a beating without breaking into a million pieces.
3D printing this is cool and impressive to pull off such a high and narrow print. But practically speaking it makes no sense.