Pastel

@ NoFood4u @sopuli.xyz

Posts

4
Comments

11
Joined

3 yr. ago

my mastodon: @NoFood4u@wetdry.world

4d ago

[Solved] Anyone got ideas on how to fix this bulging issue with thin prints?
Jump
2

Pastel @sopuli.xyz 4d ago
Thanks, but unfortunately i only have a 0.2 nozzle. Solid walls beyond 0.5mm in thickness border on impractical for an airplane anyway. I had success printing walls as thin as 0.15mm, but that only works with at least a little bit of infill, if i have to make it heavier i would rather just do that.

4d ago

[Solved] Anyone got ideas on how to fix this bulging issue with thin prints?

Thanks for the recommendation. I can freely redesign it, but i don't think slicing is causing any issues here. FreeCAD has no problem creating thin meshes and Orca Slicer correctly generates just a single smooth curve for every layer.

4d ago

[Solved] Anyone got ideas on how to fix this bulging issue with thin prints?

Jump

Pastel @sopuli.xyz 4d ago

Thanks for sharing. I had the speed set pretty high for all my attempts so this could be it. I'll update the post when it finishes.

4d ago

[Solved] Anyone got ideas on how to fix this bulging issue with thin prints?

Jump

Pastel @sopuli.xyz 4d ago

Thanks for the reply. The bed already gets way more time than it needs to heat up so that part is fine. Printing it a lot slower will probably help equalize temperature tho. I'll try that and we'll see if it works.

4d ago

[Solved] Anyone got ideas on how to fix this bulging issue with thin prints?

Jump

Pastel @sopuli.xyz 4d ago

Thanks for the suggestions. I could definitely add some perpendicular supports to stabilize the print, but don't want to do that except as a last resort since i know for certain that my printer is capable of the precision needed here. I will probably do that if the other ideas don't work.

4d ago

[Solved] Anyone got ideas on how to fix this bulging issue with thin prints?

Jump

Pastel @sopuli.xyz 4d ago

Thanks, i'll try that.

4d ago

[Solved] Anyone got ideas on how to fix this bulging issue with thin prints?

Jump

Pastel @sopuli.xyz 4d ago

Thanks for helping. It's PLA at 210C, 60C bed temp, with an enclosure. The whole thing finishes in just 1.5h and is 25cm high so new layers might be getting placed before the ones below had time to cool down. I'll try it slowed down and update the post when it's done.