Skip Navigation

User banner

Remy Rose

@ MxRemy @piefed.social

Posts
3
Comments
160
Joined
2 yr. ago

I like knitting, math, and uplifting the proletariat.

Old account: @MxRemy@lemmy.one (if lemmy.one hasn't died yet)

  • Decentralized Instagram alternative Pixelfed launches mobile apps

    Jump

  • I've been doing that exact thing, but only as long as the images would be Instagram-worthy in the first place. Not just temporary junk. I figure it's probably more optimized for picture storage, since that's the whole point right? Plus then I get it two places instead of one!

    If you use the raw media link itself instead of the link to the post, it displays on Lemmy exactly the same as if you'd uploaded it here in the first place. So that's nice.

  • Fediverse review platform

    Jump

  • Oooh thank you for linking this, I hadn't heard of it. Super cool!!

  • Consider trying PHA filament!

    Jump

  • It doesn't seem to be, or if it is, it's in a very different way. A lot of other materials seem to get more brittle in humidity, but I haven't noticed that with PHA.

  • Consider trying PHA filament!

    Jump

  • We've tried every brand I can find, like Colorfabb AllPHA, Beyond Plastic BioPHA, and Bosk Regen. We usually order directly from them since it's hard to find in a distributor, but we're in the Northeast U.S.A., so it'd be really nice if anyone was making it around here.

  • Consider trying PHA filament!

    Jump

  • That's just if you're having too much trouble with warping, which we generally don't, and it doesn't apply to perimeters or top layers, just bottom layers and infill. We've printed plenty of parts near solid with no issue at all. In addition, PHA is inherently more durable than PLA anyway.

  • Consider trying PHA filament!

    Jump

  • Depends on how thick it is and what biome it degrades in, but in my compost it seems pretty comparable to wood?

  • Consider trying PHA filament!

    Jump

  • LOL I thought the same thing! Santa ḩ̶͑͠ͅȕ̸̢̫͐͒n̴̠̍ḡ̷̢̼͈͊̌͠é̶̡̘͚͔͛̕r̸̘̱̄̇́ś̴̽͜

  • Consider trying PHA filament!

    Jump

  • Ohhh sure yeah, up front it does! There's definitely some work to get it figured out the first time, that's very true. It took us a while to iron out the settings. Once you get that stuff worked out though, from then on it's pretty smooooooth.

  • Consider trying PHA filament!

    Jump

  • I disagree, but sometimes... difficult things are worth doing? It's not like we randomly decided to use it for no reason afterall.

  • Consider trying PHA filament!

    Jump

  • Oh, I should also have mentioned in the original post! Most of these pics/vids are of stuff printed on a low end printer with 0.6mm nozzle, not using high resolution settings. It's all just stuff our patrons have requested, who are more interested in getting it soon than it looking SUPER nice. It can absolutely be printed with super high detail in mind instead.

  • Consider trying PHA filament!

    Jump

  • The thing about the warping is, while most settings are nearly exactly the same as with PLA, there's a few things that have to be the exact opposite. Once you get done fiddling with it, it actually prints like a dream. We even use it as our default material unless somebody requests otherwise. If it was unprintable, we wouldn't be able to do that. Some stuff we've learned:

    • Bed temp turned completely off!
    • Use a fresh layer of a good 3d printing adhesive. (If your adhesive is heat activated, 35C should roughly be enough to activate without messing with the PHA)
    • If you have an enclosure, open it up as much as possible. I noticed I have a lot more warping in my enclosed printer than my unenclosed one.
    • Try out a few different fan settings. I personally have better luck with less fan.
    • Put a big giant brim on it. Maybe even one made out of a different material than the object itself, if you’ve got dual extrusion.
    • The higher the infill percentage and the more solid bottom layers there are, the more it will warp. So avoid that where possible.
    • Most slicers probably already print the first layer at a chunkier line width than the nozzle size, but feel free to jack up the line width even more.
    • Set the first layer pattern to concentric or Hilbert curve, evens out the distribution of forces that cause warping.
    • Finally, if all else fails… Rotate the object until it’s sitting on a really impractical edge, then print it in sort of a “cradle” of support material. BVOH or PVA if you've got it. Basically make as little of it touch the build plate as possible? I don’t like this option because it requires dual extrusion and is pretty wasteful.

    That all probably sounds pretty extreme but honestly these are worst case scenarios? Normally it just works. Maybe part of this also comes down to the fact that all the people making it have been refining their product for a while now to deal with the notorious warpy-ness, so it's just not as bad as it used to be. We've used every brand we can find, Colorfabb's AllPHA, Beyond Plastic's BioPHA, Bosk's Regen, they're all pretty comparable. Here's a vid of another PHA print in progress right now, one where we really didn't even follow most of those tips above, and it's going fine. It's the second one of these.

  • What are some fediverse apps that need contributors?

    Jump

  • I'd personally love to see Ibis get finished enough to become the go-to platform for fan wiki sites, replacing all the garbage ones filled with ads.

  • Help Replicating a filter

    Jump

  • What if you printed it flat as a rectangle and then rolled it up and sealed the edges? Seems like it'd print better that way, no retractions, no bridging, no fragile areas of like ten 1mm-width layers stacked on top each other.

  • I am looking for peertube instances, which one do you recommend?

    Jump

  • That's where I'm at, nice place!

  • Deleted

    Permanently Deleted

    Jump

  • I'm not sure about overall activity, but I do know my feed is active enough that i can't read ALL of it unless I spend like an hour or more per day on here, and that's plenty active for me.

  • feddit.online will live on as a PieFed instance

    Jump

  • I migrated to the flagship PieFed instance a while ago and haven't regretted it at all. This place rocks! I would love it if there was an app though, not a big fan of PWAs lol. If I was smarter, I'd try to make one myself. Very exciting to see more instances popping up!

  • Thought this would be good here

    Jump

  • I enjoy the deranged erotica, partially because it's good but also because it makes the toxic alpha male/sigma male dudebro types go "no, not like that!"

  • Removed

    Proposal to create a collective to own the topic-based Lemmy instances

    Jump

  • I assumed, by "They are not being as used as I expected/hoped.", that the OP was implying, "- by the members of said instances". And that the closed-registration bit was part of the proposal, not the existing state of affairs. I didn't realize their instances were already closed-registration.

    Ah, I see. I misread a bit. I thought they were being used differently than expected, not less than expected.

  • Removed

    Proposal to create a collective to own the topic-based Lemmy instances

    Jump

  • I don't run any instances, but that does seem potentially like a pretty neat idea.

    I am really curious about the unexpected behaviors of your instance members though! What are they doing, just treating it as a general instance and not really engaging with the local theme?

  • Bandwagon is Emissary’s Bandcamp Alternative

    Jump

  • Mirlo.space is working on federation too. I think they're not as far along in that regard, but further along in terms of being a bandcamp replacement? Last I heard, anyway. I buy stuff from there, payment works.