Skip Navigation

InitialsDiceBearhttps://github.com/dicebear/dicebearhttps://creativecommons.org/publicdomain/zero/1.0/„Initials” (https://github.com/dicebear/dicebear) by „DiceBear”, licensed under „CC0 1.0” (https://creativecommons.org/publicdomain/zero/1.0/)B

Bluewing

@ Bluewing @lemmy.world

Posts
4
Comments
588
Joined
2 yr. ago

  • All downhill from there

    Jump

  • Oh, you want a classroom lesson. After the kill you have one of two choices. You can either cut up the animal and carry it home in pieces, making multiple trips to do so if alone. Or you can process the animal on the spot. Taking a few days to do so.

    If you are persistence hunting, you are almost always hunting in a pack. And everyone can carry something back to the camp. Remember: Not everything is going to be brought back. A moose will dress out maybe at 50% at best. And you leave what you can't carry or don't want behind. Modern hunters often do similar today. If I can't get a pickup or 4 wheeler to the spot, I field dress the deer and cut it into quarters and make a couple of trips to carry the meat out. A 200lbs deer will yield about 90lbs of edible meat-- give or take. Easily carried out by one person in 2 trips.

    Or you can process the carcass on the spot. It was a common hunting technique in the North Americas to run a herd of animals like bison off a cliff to kill or cripple them. It might take a day or two to set things up, but as the hunt began and the herd was funneled to the cliff, the rest of the group, those that weren't able to actively participate in the hunt, would follow at a distance behind the hunters. When the herd was run off the cliff, everyone would set up camp right by the kill area and simply eat and process as much as they wanted for later. Again, leaving behind what they couldn't process or want.

    All this information is available by a simple search if you want to know more. A method I highly encourage everyone to use to gain knowledge.

  • All downhill from there

    Jump

  • Meh, zombie infestations are easily prevented by simply the shoe laces together of the dead. Thus preventing them from even walking.

  • All downhill from there

    Jump

  • Moose hunters just shoot them these days. The only time anyone is running any more is when they are headed to a charger for their phone because the charge is down to 10%

  • I finished my 3D Printable screw design! Excellent print ability, reliable for simple use, though the head is prone to strip... can't win them all.

    Jump

  • I've seen hydraulic cylinders up to a mere 150 tons, but they both used vee threads. But those cylinders can had far,far bigger than that. That would be a very good application of buttress threads. Much like the balls screws on a punch press. Lots of force in one direction.

  • I finished my 3D Printable screw design! Excellent print ability, reliable for simple use, though the head is prone to strip... can't win them all.

    Jump

  • Surgery is not required. You only need to 5% smater than the tool you are using.

  • I finished my 3D Printable screw design! Excellent print ability, reliable for simple use, though the head is prone to strip... can't win them all.

    Jump

  • A properly fitted straight bladed screw driver will fit snugly in the slot along it's entire length. This offers more than the 'two points of contact' that your poorly chosen screw driver does. Add a hollow ground blade, they get an amazingly powerful grip. Learn to fit a screw driver properly and you will seldom have a problem with a slotted screw. As toolmakers and high end gunsmiths know and you don't.

    Of course, if you have neither the skill or enough ambition to be bothered to ensure the tool fits the fasteners correctly, you probably should choose a more foolproof tool and fastener.

  • I finished my 3D Printable screw design! Excellent print ability, reliable for simple use, though the head is prone to strip... can't win them all.

    Jump

  • At that diameter, I would probably recommend a bottle cap thread. It's a rounded profile that is easy to print.

  • Prints keep failing.

    Jump

  • Under Quality -- Layer Height -- First Layer Height. Adjust the layer height as needed. Generally speaking, your first layer should be no less than half the nozzle diameter. So, a .40mm nozzle first layer height should be .20mm. Thought for larger beds, you may wish to increase the first layer height a bit to help with bed adhesion over a wide area.

    My first inclination is to got to Quality -- Walls and surfaces -- Avoid Crossing walls and check that box. See what happens when you print your Benchy.

    If you still have issues, go to you filament settings for the filament you are printing with, (the little pencil to the right of the filament box), make sure you have the Advanced slider on, click on the Settings Overrides tab and check the Length, Z-hop height, On surfaces, (select All Surfaces in the drop down box to the right), Retraction speed, (the default is fine), the De-retraction speed, (set to zero), Travel Distance threshold, Retract on layer change, Wipe while retracting, and wipe distance.

    This is a start.

  • I finished my 3D Printable screw design! Excellent print ability, reliable for simple use, though the head is prone to strip... can't win them all.

    Jump

  • Having single pointed 3"-4 Buttress threads on a manual lathe for punch presses more than once and hand grinding the tool bit from 1/2" x 1" HSS, I still have some PTSD over that thread form. But hey, if you are looking to make breaching for a 16" Navel Rifle, it's really the only game in town......

    As a toolmaker, I have seen Buttress threads used in only 3 places. Large artillery breaching, punch press ball screws, and VERY high end, (read expensive), machinist clamps. I own a pair I picked up at an auction 30 years ago in a bucket of "junk". I think they were made by another machinist for personal use.

    Edit to add: Buttress threads are directional. They can be either left or right. The choice being totally dependent the direction of the force applied to the threads. The perpendicular edge is the strong part. And the direction must always be called out.

  • I finished my 3D Printable screw design! Excellent print ability, reliable for simple use, though the head is prone to strip... can't win them all.

    Jump

  • Meh, slotted screws get used a lot. What most people don't get is the reason they have problems with slotted screw heads is because they don't use a proper fitted driver that fits the slot correctly. You always try to use an undersized driver and are then shocked to discover you have problems.

    Don't blame the tool for your poor choices. Use the properly fitted tool for the job.

  • I finished my 3D Printable screw design! Excellent print ability, reliable for simple use, though the head is prone to strip... can't win them all.

    Jump

  • Number series machine screws get their designations from wire gage sizes that they were made from. Which traces back to several different British thread systems waaayyy back in the day. While there is no hard and fast rule, the number series screws are sometimes referred to as 'Machine screws' while fractional series fasteners are referred to as 'Bolts'. No one knows why, and Whitworth is dead. (Toolmaker humor).

    All actual diameters of screws are a bit under nominal for external and a bit over size nominal for internal. This is the clearance needed to make a screw and nut fit together. This all applies to metric thread fasteners also. Thread fit classes are a story for another day.

  • Gone forever

    Jump

  • My pie chart of blame looks more like 90%/10%. Where if I simply set something down, even with the need to use it immediately, I lose it.

    I rely heavily on my Wife to find things for me. Without her, I would lose my head.

  • This took forever to design. But I got a functional Screw and Nut 3D Printed

    Jump

  • A custom vee thread screw and nut, as you have done, is easily done in the Thread Profile workbench. As a workbench, I don't think it's all that popular, at least it's not going to be as popular as the Fasteners workbench.

    Other than creating the head of the screw and the shape of your nut as a separate sketch and pad, you can simply fill a couple of boxes with your own numbers, click the helix button, then click the Additive Loft button, both provided in the workbench toolbar, wait for the threads to generate, and it's done. And it's parametric.

    I recommend checking it out if you're using FreeCAD.

  • best print farm 3d-printer for PETG?

    Jump

  • Prusa Core One with MMU or Qidi Plus 4 and the Qidi Box. The Qidi Box is at the pre-sale point now. They have been taking things slow with their AMS unit. Either printer is affordable and in the size range you want. Both are corexy, Qidi run Klipper and Prusa runs Marlin firmware. Both brands have heated enclosures to make printing fussier filaments easier. And PETG definitely benefits from that.

    If I was starting over and wanted a larger printer, it would be a coin flip choice between those 2 printers.

  • Bambu Printers Discussion

    Jump

  • I got caught the same way with an impulse buy of an A1 Mini/AMS Lite last fall. I'm still running the 1.04 firmware and Orca Slicer on LAN mode for several months now with little issue, (sometimes it drops the LAN connection on start up and needs to be manually reconnected). If you do upgrade to the evil firmware and don't like it, Bambu currently does let you downgrade to an older firmware and you can go back to a safer firmware.

    Most of the Bambu users I have interacted with don't care because they want to run their printer from the Bambu Handy app. And if you want to use the Handy app, you can't use LAN mode because you need to be logged in. But I don't like using my phone for such things anyway.

  • New Stainless Steel Filament Simplifies Metal 3D Printing on Desktop FDMs

    Jump

  • Meh, you can get used and working benchtop electric heat treat furnaces for around $500US that would be suitable for home use.

  • Deleted

    Permanently Deleted

    Jump

  • I live in Minnesota USA-- The Land of 10,000 lakes. It's actually 14,380 bodies of water 10 acres or larger. 117,000 if you add the waterbodies/ponds smaller than 10 acres. I'm sitting in my house drinking my tea and looking at the lake I live on. Minnesotans own 14,505 registered watercraft per 100,000 people-- the most in the US. And all of us spend LOT of time fishing on them. But it would be extremely illegal to use nets or traps to fish for them. (There are carve outs for Native Americans to do some limited netting).

    So historically, eating fish on a non-commercial scale has been an important thing in this region since before European settlers showed up. But it has never been the main source of meat due to the general extra work it takes. It's still easier to stick an arrow, (even a well thrown rock), into rabbit or squirrel. And a far bigger payout in calories to shoot that arrow into a white tail deer, elk, or moose with less effort than a fish.

  • Trying to pick a printer

    Jump

  • Honestly, my second choice from the Core One would be the Qidi Plus 4. I wanted the X-Smart 3 1803 sized printer as a second machine. But it was discontinued before I got off my butt to buy something. (I ended up with a Bambu mini combo as an impulse buy). But if I was starting over with my first printer, I would seriously consider a Qidi machine.

  • Deleted

    Permanently Deleted

    Jump

  • Fishing is fun and good, but you still need access to water with a fish living in it. But a sharp stick or a rock is still cheaper and easier. Even a bow and arrow is very low tech and easily fashioned.

  • Trying to pick a printer

    Jump

  • As a bit of Prusa fan boi myself, I too would recommend the Core One over the Mk4s at this moment. It's a matter of "Buy once. Cry once." Cheap often costs more in the long run.

    When you are facing a 30 hour print or a long project, a bit extra speed is not only nice but helpful. Plus the heated enclosure can provide access to more engineering grade filaments. While you might not need to print nylon or ABS every day, you will probably find you are going to want to at some point a bit of those types for a project or two. And I believe the Core One also has filtered exhaust air to control nasty fumes that FDM printing can cause, (yes, even PLA has particulates that won't kill you immediately, but they ain't good for you either long term).

    Personally, I find the MMU to be a god awful design mess. A rat's nest of loose tubes and spools of filaments, but it does work. I might consider the Box Turtle over the MMU just for the neatness of the design. I find the multi-filament units, cool for very little color printing I do, but it's the ability to use up spools that don't have enough left one them to complete a print by switching to a different spool that can finish the print automatically to be far more valuable. It's cut down my clutter of mostly used spools to near zero. I paid for all that kilo, I'm bloody gonna use it all dammit.